E-Disk® Altima™ II M.2 NVMe SSD I-Series


BiTMICRO® E-Disk Altima II M.2 NVMe SSD I-Series comes in small form factor, very low power consumption and high capacity with next level of performance. It delivers maximum bandwidth of 2.7 GB/s with a capacity range up to 2TB. Optional AES-256 encryption and TCG Opal protect data from unauthorized access.

E-Disk Altima II M.2 SSD I-Series is designed and built to meet industrial environmental requirements for industrial applications. It can withstand extreme temperature, vibration, and humidity while storing important information. Built-in features such as TRIM, global wear-leveling, LDPC ECC and other advanced technologies ensure SSD reliability while extending SSD usable life.

  • Industrial Temperature Range*
  • Specified Rugged**
  • Assembled in U.S.A***
  • Low Power Consumption
  • Small Form Factor
  • TRIM and SMART
  • Supports SW Data Secure Erase with Power-On
  • Supports SW Write Protect with Power-On
  • AES-256 Encryption (Optional)
  • TCG OPAL 2.0 Compliant SED (Optional)
  • Supports SW Crypto Key Erase with Power-On (Optional and requires TCG OPAL)

* Each SSD is tested to operate between the industrial wide (-40 to +85 °C) temperature ranges.
** Each SSD is manufactured to withstand extreme, rugged and hostile environmental conditions in accordance with stated specifications.
*** Assembled in U.S.A with domestic / non-domestic sourced parts.

PCIe Gen3 x4, NVMe 1.3
Form Factor
M.2 2280
Storage Capacity
3D TLC: 256GB to 1TB
Performance (Sequential)
Read: Up to 2.7 GB/s
Write: Up to 1.04 GB/s
SW Data Secure Erase with Power-On
SW Write Protect with Power-On
Operating Temperature
-40 to 85 ºC
Operating Shock
1,500 G, half-sine, 0.5ms
Operating Vibration
20 Grms, 80-2000Hz, 1 hr/axis
Optional Features
Storage Capacity 3D TLC: 2TB (Height: 5mm)
AES-256 Encryption
TCG OPAL 2.0 Compliant
SW Crypto Key Erase with Power-On (requires TCG OPAL)
Extended Warranty
1 Year
For all inquiries including, Sales Inquiries, please contact or call us:

Sales & General Inquiries:

+1 888-72-FLASH

Customer & Technical Support:

+1 888-723-0123

Note: Standard and optional features may change and not all combination of features are implemented. The information stated in these product pages are informational only. To ensure that BiTMICRO meets your requirements, please contact us so that we can properly assist you.